Canine Infectious Hepatitis Test Kit

Introduction

Canine Infectious Hepatitis Test kit is a lateral flow immunochromatography for qualitative detection of canine adenovirus type I antigen (CAV-I Ag) in canine eyes, nasal, anal secretions, or serum and plasma samples.Test time: 5-10 minutes

Benefits

1. One-step whole blood, serum and plasma testing.

2. Simple operation, non-professional on-site inspection.

3. The detection process is fast, and the result will be displayed in about 15 minutes.

4. The test time is less than or equal to 10 seconds, and it can detect 270 samples per hour at the fastest.

5. The detection equipment is compact, easy to carry, mobile terminal operation, cloud platform quality control.

6. The detection sensitivity is high, comparable to that of enzyme-labeled kits.

Components

• Test devices

• Droppers

• Single Buffer

• IFU

Principle

Canine Infectious Hepatitis Test kit based on sandwich transverse flow immune tomography. The test equipment has a test window for observing the analysis run and result readings. Before running the test, the test window has an invisible T (test) area and a C (control) area. When the processed sample is applied to the sample well on the device, the liquid flows horizontally across the surface of the test rod and reacts with the pre-coated monoclonal antibody. If CAV-I will be visible, there will be antigens in the T-line specimens. After the sample is applied, the C line should always exist, indicating that the result is valid. In this way, the device can accurately indicate the presence of cav-I virus antigen in the sample.

Strage and stablity

The kit can be stored at room temperature (2-30°C). The test kit is stable through the expiration date (18 months) marked on the package label. DO NOT FREEZE. Do not store the test kit in direct sunlight.

Other Items

Test Procedure

- Allow all materials, including specimen and test device, recover to 15-25℃ before running the assay.

- Take out the test card from the foil pouch and place it horizontally.

- Collect 20μL of the prepared specimen (serum, plasma or whole blood) into a vial of assay buffer and mix well. Then drop 3 drops (approx. 120μL) of the diluted sample into the sample hole "S" of the test card.

- Interpret the result in 5-10 minutes. Result after 10 minutes is considered as invalid.

INTERPRETATION OF ASSAY RESULT

- Positive (+): Whether the T line is clear or fuzzy, the "C" line and the region "T" line are present.

- Negative (-): Shows only the sharp C line. No T line.

- Invalid: no color lines in zone C. Whether the T line appears or not.